Atomic Foundations of Matter
Complete Visual Notes • Laws of Chemical Combination • Dalton’s Atomic Theory • Covalent Bonds • Ionic Bonds • Ions • Formulae • Properties • Molecular Mass • Formula Unit Mass • Question Answers
From Atoms to Compounds
Atoms having a stable outermost shell generally do not need to gain, lose or share electrons. Other atoms tend to achieve greater stability by rearranging their valence electrons.
Loss of Electrons
An atom may lose valence electrons and form a positively charged ion.
Gain of Electrons
An atom may gain electrons and form a negatively charged ion.
Sharing of Electrons
Two atoms may share valence electrons and form a covalent bond.
Why Does a Compound Have New Properties?
The properties of a compound can be very different from those of the elements that form it.
Hydrogen is combustible and oxygen supports combustion. Yet water, formed from hydrogen and oxygen, neither burns nor supports burning.
Law of Conservation of Mass
The law was proposed by Antoine Lavoisier in 1789. It is one of the fundamental laws on which quantitative chemistry is based.
Activity 9.1 – Mass During a Physical Change
Salt is added to water and the mass is measured before and after the salt dissolves.
Observation
The mass of the final salt solution is equal to the combined mass of the water and salt.
Conclusion
A physical change does not result in the disappearance or creation of matter.
Activity 9.2 – Vinegar and Baking Soda
Vinegar reacts with baking soda and carbon dioxide gas is produced.
Open System
Carbon dioxide escapes into the surroundings.
Therefore, if only the flask is weighed after the reaction, its measured mass appears lower.
Closed System
A balloon attached to the flask traps the carbon dioxide produced.
When the complete closed system is weighed, the initial and final masses remain the same within experimental error.
Activity 9.3 – Sodium Sulfate and Barium Chloride
A white precipitate of barium sulfate is produced when the two solutions are mixed.
Worked Example
Calcium carbonate = 4.00 g
Hydrochloric acid = 2.92 g
Total reactant mass:
4.00 + 2.92 = 6.92 g
Products:
CO₂ = 1.76 g
H₂O = 0.72 g
CaCl₂ = 4.44 g
Total product mass:
1.76 + 0.72 + 4.44 = 6.92 g
Therefore: Mass of reactants = Mass of products.
Law of Constant Proportions
This law is also called:
- Law of Definite Proportions
- Proust’s Law
Water – The Important Example
Pure water obtained from a river, borewell or ocean always contains hydrogen and oxygen in the same mass ratio:
Worked Example – Sodium Chloride
In sodium chloride, sodium and chlorine combine in the mass ratio 23 : 35.5.
If sodium = 46 g:
Why Does This Law Not Apply to Mixtures?
The components of a mixture can be present in different proportions. A compound, however, has a definite chemical composition.
Dalton’s Atomic Theory
The Law of Conservation of Mass and the Law of Constant Proportions formed an important basis for Dalton’s Atomic Theory.
Dalton’s Postulates
- All matter is made up of very tiny particles called atoms.
- Atoms participate in chemical reactions.
- Atoms are indivisible according to Dalton’s original theory and cannot be created or destroyed during a chemical reaction.
- Atoms of a given element are identical in mass and chemical properties according to Dalton’s model.
- Atoms of different elements have different masses and chemical properties.
- Atoms combine in simple whole-number ratios to form compounds.
- The relative number and kinds of atoms remain constant in a given compound.
How Do Atoms Combine?
Molecule of an Element
Atoms of the same element combine.
Examples: H₂, O₂, N₂, Cl₂.
Molecule of a Compound
Atoms of different elements combine.
Examples: HCl, H₂O, CO₂, NH₃.
Some stable elements, such as helium, can exist as individual atoms.
Octet and Duplet
Duplet
The K shell is stable when it contains two electrons.
Octet
For many atoms, eight electrons in the valence shell represent a stable configuration.
Two Main Ways Atoms Combine
Sharing of Electrons
Produces a covalent bond.
Transfer of Electrons
Produces ions that attract one another through an ionic bond.
Covalent Bond
Formation of Hydrogen Molecule – H₂
Hydrogen has one electron in its K shell and needs one more electron to complete its duplet.
Two hydrogen atoms therefore share one electron each.
Formation of Chlorine Molecule – Cl₂
Chlorine has seven valence electrons. Each chlorine atom needs one more electron to complete its octet.
Two chlorine atoms share one pair of electrons:
Formation of Oxygen Molecule – O₂
Oxygen has six valence electrons and needs two more electrons to complete its octet.
Therefore two oxygen atoms share two pairs of electrons.
Nitrogen Molecule – N₂
Nitrogen has five valence electrons. Each atom requires three more electrons for an octet.
Two nitrogen atoms share three electron pairs:
Hydrogen Chloride – HCl
Hydrogen needs one electron for its duplet and chlorine needs one for its octet.
They share a pair of electrons:
Formation of Water – H₂O
Oxygen needs two electrons while each hydrogen atom requires one. Therefore one oxygen atom shares electrons with two hydrogen atoms.
Naming Covalent Compounds
Numerical prefixes show how many atoms of each element occur in a covalent compound.
| Number | Prefix |
|---|---|
| 1 | mono- |
| 2 | di- |
| 3 | tri- |
| 4 | tetra- |
| 5 | penta- |
| 6 | hexa- |
- The first element retains its usual name.
- The second element generally ends in -ide.
- Mono- is usually omitted before the first element.
- When pronunciation requires it, vowels may be dropped: monoxide rather than monooxide.
| Formula | Name |
|---|---|
| CO | Carbon monoxide |
| CO₂ | Carbon dioxide |
| CS₂ | Carbon disulfide |
| PCl₃ | Phosphorus trichloride |
| SF₆ | Sulfur hexafluoride |
| N₂O₄ | Dinitrogen tetroxide |
| N₂O₅ | Dinitrogen pentoxide |
Ionic Bond
What is an Ion?
An atom becomes electrically charged when the number of electrons no longer equals the number of protons.
Cation
A positively charged ion formed when an atom loses electrons.
Examples: Na⁺, Mg²⁺, Al³⁺.
Anion
A negatively charged ion formed when an atom gains electrons.
Examples: Cl⁻, O²⁻, S²⁻.
Formation of Sodium Ion
Sodium has atomic number 11 and electronic configuration:
Sodium loses one electron:
Formation of Chloride Ion
Chlorine accepts one electron:
Formation of Sodium Chloride
Crystal Structure of Ionic Compounds
Ionic compounds generally do not exist as isolated molecules. Their oppositely charged ions form a repeating three-dimensional arrangement called a crystal lattice.
In the sodium chloride crystal described in the chapter, each Na⁺ ion is surrounded by six Cl⁻ ions and each Cl⁻ ion by six Na⁺ ions in the three-dimensional structure.
Common Monoatomic Ions
| Ion | Formula | Valency |
|---|---|---|
| Sodium | Na⁺ | 1 |
| Lithium | Li⁺ | 1 |
| Potassium | K⁺ | 1 |
| Silver | Ag⁺ | 1 |
| Calcium | Ca²⁺ | 2 |
| Barium | Ba²⁺ | 2 |
| Ferrous ion | Fe²⁺ | 2 |
| Ferric ion | Fe³⁺ | 3 |
| Cuprous ion | Cu⁺ | 1 |
| Cupric ion | Cu²⁺ | 2 |
| Magnesium | Mg²⁺ | 2 |
| Zinc | Zn²⁺ | 2 |
| Aluminium | Al³⁺ | 3 |
| Fluoride | F⁻ | 1 |
| Chloride | Cl⁻ | 1 |
| Bromide | Br⁻ | 1 |
| Iodide | I⁻ | 1 |
| Oxide | O²⁻ | 2 |
| Sulfide | S²⁻ | 2 |
Common Polyatomic Ions
| Ion | Formula | Valency |
|---|---|---|
| Hydroxide | OH⁻ | 1 |
| Nitrate | NO₃⁻ | 1 |
| Hydrogencarbonate | HCO₃⁻ | 1 |
| Carbonate | CO₃²⁻ | 2 |
| Sulfate | SO₄²⁻ | 2 |
| Ammonium | NH₄⁺ | 1 |
Naming Ionic Compounds
Write the name of the cation first, followed by the anion.
Simple anions generally end in -ide.
Writing Chemical Formulae
8.1 Covalent Compounds
- Write the symbols of the constituent elements.
- Write their valencies.
- Cross the valencies and use them as subscripts.
Hydrogen Chloride
↓ ↓
HCl
Hydrogen Sulfide
↘ ↙
H₂S
Carbon Tetrachloride
↘ ↙
CCl₄
8.2 Ionic Compounds
- Write the symbol of the cation first.
- Write the symbol of the anion second.
- Write the numerical values of their charges.
- Cross the charge numbers to become subscripts.
- Reduce the subscripts to the smallest whole-number ratio when required.
| Combination | After criss-cross | Final Formula |
|---|---|---|
| Ca²⁺ + Cl⁻ | Ca₁Cl₂ | CaCl₂ |
| Al³⁺ + O²⁻ | Al₂O₃ | Al₂O₃ |
| Mg²⁺ + O²⁻ | Mg₂O₂ | MgO |
| Ca²⁺ + CO₃²⁻ | Ca₂(CO₃)₂ | CaCO₃ |
| Mg²⁺ + OH⁻ | Mg(OH)₂ | Mg(OH)₂ |
Using Brackets with Polyatomic Ions
Brackets are used when more than one copy of a polyatomic ion is required.
Mg(OH)₂
Two hydroxide ions.
Al(OH)₃
Three hydroxide ions.
Al₂(SO₄)₃
Three sulfate ions.
Incorrect: AlOH₃
Properties of Ionic and Covalent Compounds
| Property | Ionic Compounds | Covalent Compounds |
|---|---|---|
| Particles | Positive and negative ions | Usually molecules |
| Water solubility | Generally soluble | Many are insoluble; exceptions exist |
| Kerosene / petrol | Generally insoluble | Many dissolve in such solvents |
| Conductivity – solid | Do not conduct | Generally do not conduct |
| Conductivity – aqueous | Conduct when mobile ions are present | Generally do not produce mobile ions |
| Conductivity – molten | Conduct because ions are free to move | Generally poor conductors |
| Melting / boiling point | Generally high | Usually lower |
Why Does Solid NaCl Not Conduct Electricity?
In solid sodium chloride the ions are held in fixed positions in the crystal lattice.
Electric current requires charged particles that can move.
Why Does Sugar Solution Not Conduct?
Sugar is a covalent compound. It may dissolve in water, but it does not produce the free ions required to carry electric current.
Salt solution conducts electricity while sugar solution generally does not because dissolved ionic salts provide mobile ions.
Molecular Mass and Formula Unit Mass
10.1 Molecular Mass
Example – H₂O
O = 16 u
Molecular mass of H₂O
= (2 × 1) + (1 × 16)
= 18 u
Example – CO₂
O = 16 u
Molecular mass of CO₂
= 12 + (2 × 16)
= 44 u
10.2 Formula Unit Mass
Ionic compounds form extended crystal structures rather than separate molecules.
Example – Na₂O
O = 16 u
Formula unit mass
= (2 × 23) + 16
= 62 u
Example – Ca(NO₃)₂
N = 14 u
O = 16 u
= 40 + 2[14 + (3 × 16)]
= 40 + 2(62)
= 164 u
Molecule → Molecular mass
Ionic formula unit → Formula unit mass
Atomic and Nuclear Energy
The chapter briefly connects atomic science with nuclear energy. Changes involving atomic nuclei can release enormous amounts of energy.
- Electricity generation
- Medical applications
- Scientific research
- Space exploration
Scientists Behind the Ideas
Antoine Lavoisier
Proposed the Law of Conservation of Mass and is widely associated with the foundations of modern quantitative chemistry.
Joseph Louis Proust
Established through careful experimental work that a compound has a fixed composition by mass.
John Dalton
Formulated atomic postulates that explained many observations concerning chemical combinations.
Atomic Foundations of Matter – At a Glance
Important Questions with Answers
1. A student burns 10 g ethanol in an open beaker and no residue remains. Is mass conservation violated?
No.
The products of combustion include gases that leave the open beaker. The mass appears to disappear only because the complete system has not been weighed.
If all reactants and gaseous products were included, total mass would remain conserved.
2. 20 g hydrogen reacts completely with 160 g oxygen. How much water is formed?
According to conservation of mass:
Mass of water = 20 + 160 = 180 g.
3. A compound contains 40% sulfur and 60% oxygen. If it contains 20 g sulfur, calculate oxygen mass.
S : O = 40 : 60 = 2 : 3.
If sulfur = 20 g:
Oxygen = 20 × 3/2 = 30 g.
4. CO contains carbon and oxygen in a mass ratio of 3:4. Find oxygen required for 9 g carbon.
C : O = 3 : 4
For 9 g carbon:
Oxygen = 9 × 4/3 = 12 g.
5. Why does the Law of Definite Proportions apply to compounds but not mixtures?
A chemical compound has a fixed composition because its constituent atoms combine in definite proportions.
The substances in a mixture are only physically combined and their relative amounts may vary.
6. Copper and oxygen combine in ratios 4:1 and 8:2. Do the results agree with constant proportions?
Yes.
8 : 2 simplifies to 4 : 1.
Both samples therefore have the same mass ratio.
7. Assertion: 2 g hydrogen + 16 g oxygen form 18 g water. Reason: Dalton said atoms combine in a simple whole-number ratio by mass.
The assertion is true.
The reason as stated is false because Dalton’s postulate refers to atoms combining in simple whole-number ratios, not specifically a simple whole-number mass ratio.
Correct option: (iii) A true, R false.
8. Explain the structure of N₂.
Nitrogen has five valence electrons and needs three more for a complete octet.
Two nitrogen atoms share three electron pairs.
N≡N
9. Explain the formation of F₂.
Fluorine has atomic number 9 and configuration 2,7.
Each fluorine atom needs one electron to complete its octet. Two fluorine atoms share one pair.
F—F
10. Show the bonding in CO₂, H₂S and NH₃.
CO₂: O=C=O
Carbon forms two double covalent bonds with two oxygen atoms.
H₂S: H—S—H
Sulfur shares one pair with each hydrogen.
NH₃: Nitrogen forms three single covalent bonds with three hydrogen atoms.
11. Why does neon neither transfer nor share valence electrons?
Neon has atomic number 10 and electronic configuration 2,8.
Its valence shell is already complete, so the atom is stable.
12. What type of ion does oxygen form?
Oxygen has six valence electrons and gains two electrons to complete its octet.
It therefore forms the oxide ion: O²⁻.
13. Magnesium gives two electrons while chlorine accepts one. Explain MgCl₂ formation.
Magnesium loses two electrons to become Mg²⁺.
Each chlorine atom gains one electron to become Cl⁻.
Therefore one Mg²⁺ requires two Cl⁻ ions:
MgCl₂
14. Give the formulae of potassium chloride and calcium chloride.
Potassium forms K⁺ and chlorine forms Cl⁻.
KCl
Calcium forms Ca²⁺, so two chloride ions are needed.
CaCl₂
15. Explain formation of sodium sulfide.
Sulfur gains two electrons to form S²⁻.
Each sodium atom supplies one electron.
Therefore two sodium atoms are required:
Na₂S
16. Name CO₂, NO₂, SF₆ and PCl₃.
- CO₂ – Carbon dioxide
- NO₂ – Nitrogen dioxide
- SF₆ – Sulfur hexafluoride
- PCl₃ – Phosphorus trichloride
17. Give formulae for sodium hydrogencarbonate, sulfur dioxide, ferric chloride and cuprous oxide.
- Sodium hydrogencarbonate – NaHCO₃
- Sulfur dioxide – SO₂
- Ferric chloride – FeCl₃
- Cuprous oxide – Cu₂O
18. Write formulae for Fe³⁺ + OH⁻ and K⁺ + CO₃²⁻.
Fe³⁺ + OH⁻ → Fe(OH)₃
K⁺ + CO₃²⁻ → K₂CO₃
19. A solid does not conduct electricity but its aqueous solution does. Which type of bond is likely present?
It is characteristic of an ionic compound.
The ions are fixed in the solid but become mobile when the compound dissolves in water.
20. A metal M has two valence electrons and reacts with oxygen. Predict formula, bond and conductivity.
M forms M²⁺ while oxygen forms O²⁻.
Formula: MO
Bond: Ionic
Aqueous solution: It can conduct electricity when sufficient ions are present in solution.
21. Find molecular mass of HNO₃.
H = 1, N = 14, O = 16
= 1 + 14 + 3(16)
= 1 + 14 + 48
= 63 u
22. Find molecular mass of methane, CH₄.
= 12 + 4(1)
= 16 u
23. Find formula unit mass of KCl.
K = 39 u, Cl = 35.5 u
= 39 + 35.5
= 74.5 u
24. Find formula unit mass of Mg(OH)₂.
Mg = 24, O = 16, H = 1
= 24 + 2(16 + 1)
= 24 + 34
= 58 u
Textbook Exercise – Detailed Solutions
Q1. Element A has one electron in its third shell and B has six electrons in its second shell. Analyse their bonding.
A has configuration 2,8,1.
B has configuration 2,6.
(i) A tends to lose one electron.
(ii) A forms a positive ion A⁺.
(iii) B tends to gain two electrons.
(iv) B forms B²⁻.
(v) Their combination involves electron transfer, so the bond is ionic.
(vi) Two A⁺ ions balance one B²⁻ ion.
Formula = A₂B
Q2. Element X has six valence electrons and forms a diatomic molecule. Explain.
(i) X needs two electrons to complete its octet.
Two X atoms therefore share two electron pairs.
(ii) A double covalent bond forms.
(iii) X=X
(iv) If Y has configuration 2,2, it has two valence electrons and tends to lose them while X needs two. The resulting simplest combination is YX with electron transfer and ionic bonding.
Q3. Which option provides total charge +6 and −6?
Correct option: (iii)
2 Fe³⁺ gives: 2 × (+3) = +6
3 O²⁻ gives: 3 × (−2) = −6
Total charge = 0.
Q4. Correct the statements about elements, compounds, nitrogen and water.
(i) False. Elements are composed of atoms. Some elements exist as molecules. Compounds contain atoms of different elements chemically combined.
(ii) False. A molecule of a compound contains atoms of different elements.
(iii) False. One nitrogen molecule is N₂ and contains two nitrogen atoms.
(iv) True. A water molecule contains two hydrogen atoms covalently bonded to one oxygen atom.
Q5. Write formulae of aluminium nitrate, calcium oxide and ferric oxide.
- Aluminium nitrate – Al(NO₃)₃
- Calcium oxide – CaO
- Ferric oxide – Fe₂O₃
Q6. Write formulae for Ca²⁺/Br⁻, Al³⁺/CO₃²⁻, K⁺/SO₄²⁻ and NH₄⁺/Cl⁻.
- Ca²⁺ + Br⁻ → CaBr₂
- Al³⁺ + CO₃²⁻ → Al₂(CO₃)₃
- K⁺ + SO₄²⁻ → K₂SO₄
- NH₄⁺ + Cl⁻ → NH₄Cl
Q7. Which electronic arrangement represents Cl⁻?
Chlorine has atomic number 17.
Neutral chlorine: 2,8,7
Cl⁻ has gained one electron: 2,8,8
Therefore the correct diagram is the one showing 18 electrons arranged 2,8,8, corresponding to option (iii) in the figure.
Q8. Determine masses of NH₄NO₃, H₃PO₄ and NaHCO₃.
(i) NH₄NO₃
= 2(14) + 4(1) + 3(16)
= 28 + 4 + 48
= 80 u
(ii) H₃PO₄
H = 1, P = 31, O = 16
= 3 + 31 + 64
= 98 u
(iii) NaHCO₃
= 23 + 1 + 12 + 48
= 84 u
Q9. Write compounds formed by Mg + N, Li + N, Na + S and Al + O.
- Magnesium nitride – Mg₃N₂
- Lithium nitride – Li₃N
- Sodium sulfide – Na₂S
- Aluminium oxide – Al₂O₃
Q10. Complete the cation–anion formula table.
| NO₃⁻ | SO₄²⁻ | PO₄³⁻ | |
|---|---|---|---|
| NH₄⁺ | NH₄NO₃ | (NH₄)₂SO₄ | (NH₄)₃PO₄ |
| Li⁺ | LiNO₃ | Li₂SO₄ | Li₃PO₄ |
| Al³⁺ | Al(NO₃)₃ | Al₂(SO₄)₃ | AlPO₄ |
| Cu²⁺ | Cu(NO₃)₂ | CuSO₄ | Cu₃(PO₄)₂ |
Q11. Verify conservation of mass for sodium carbonate + acetic acid.
Reactants:
5.3 g + 6.0 g = 11.3 g
Products:
2.2 + 0.9 + 8.2 = 11.3 g
Since both totals are equal, the Law of Conservation of Mass is obeyed.
Q12. A species has 11 protons, 12 neutrons and 10 electrons. Identify it.
(i) Atomic number: 11
Mass number: 11 + 12 = 23
(ii) It has 11 protons but only 10 electrons.
Charge = +1, so it is a cation.
(iii) Electronic configuration: 2,8
(iv) Atomic number 11 is sodium. The species is Na⁺.
Q13. A = 2,8,5 and B = 2,8,7. Compare reactivity and predict bonding.
(i) B is closer to completing its octet because it requires only one more electron, whereas A requires three.
(ii) Both have more than four valence electrons and are expected to achieve stability through sharing. Hence they form a covalent bond.
(iii) A has valency 3 and B valency 1.
Formula: AB₃
Q14. Assertion–Reason: Copper sulfate conducts when molten but not when solid.
Assertion: True.
Reason: False.
The reason reverses the actual behaviour. In the solid state ions are fixed in the lattice. In the molten state they are free to move.
Correct option: (iii).
Q15. Calculate electrons and neutrons in ²⁷Al, ⁸⁰Br⁻ and ²⁰¹Hg²⁺.
| Species | Protons | Electrons | Neutrons |
|---|---|---|---|
| ²⁷Al | 13 | 13 | 27 − 13 = 14 |
| ⁸⁰Br⁻ | 35 | 36 | 80 − 35 = 45 |
| ²⁰¹Hg²⁺ | 80 | 78 | 201 − 80 = 121 |

Leave a Reply