SK Tuitions CBSE Focused Class 9 Science

Journey Inside the Atom

Complete premium notes on atomic structure, subatomic particles, atomic models, electronic configuration, valency, isotopes, isobars and average atomic mass.

Board: CBSE Subject: Science Level: Board + Foundation Prepared by SK Tuitions

Chapter Overview

What you will learn

You will understand how scientists discovered electrons, protons and neutrons, why atomic models changed with new experiments, and how atomic number, mass number and valency are calculated.

Why this chapter matters

This chapter builds the foundation for chemistry. Chemical bonding, periodic classification, ions, molecules and reactions all depend on atomic structure.

Exam relevance

CBSE frequently asks definitions, comparison tables, electronic configuration, valency, isotopes, isobars, mass number calculations and reasoning questions from atomic models.

Topic 1

Full Chapter Introduction

An atom is the smallest particle of an element that takes part in chemical reactions. Earlier, atoms were considered indivisible. Later experiments proved that atoms are made of smaller particles called subatomic particles: electrons, protons and neutrons.

The history of atomic structure is a perfect example of how science grows. A model is proposed, tested by experiments, corrected when it fails, and improved when new evidence appears. Dalton imagined atoms as solid indivisible spheres. Thomson discovered electrons and proposed the plum pudding model. Rutherford discovered the nucleus through the gold foil experiment. Bohr explained stable energy levels. Chadwick discovered neutrons and solved the problem of atomic mass.

Remember This

Atomic structure is not just a memory chapter. It is a logic chapter. Every model was created to explain experimental observations.

Topic 2

Rediscovering the Roots of Atomic Theory

The idea that matter is made of tiny particles is very old. In ancient India, Acharya Kanada proposed that matter could be divided into smaller and smaller particles until a stage comes where it cannot be divided further. Such tiny particles were called parmanu.

In ancient Greece, philosophers like Leucippus and Democritus also suggested that matter is made of indivisible particles called atomos, meaning “indivisible”.

However, these early ideas were philosophical, not experimental. The scientific atomic theory began with John Dalton, who proposed that matter is made of indivisible atoms. Later discoveries proved that atoms themselves contain smaller particles.

Ancient idea of indivisible particles
→
Dalton’s atomic theory
→
Discovery of subatomic particles
→
Modern atomic structure

Exam Tip

Do not write that Dalton discovered the atom. Dalton gave the first scientific atomic theory based on experimental laws of chemical combination.

Topic 3

J. J. Thomson’s Cathode Ray Experiment and Discovery of Electron

In the late 19th century, scientists studied the discharge of electricity through gases at low pressure. J. J. Thomson used a glass discharge tube containing gas at very low pressure. Two metal plates called electrodes were fitted inside the tube: the cathode connected to the negative terminal and the anode connected to the positive terminal.

When a high voltage was applied, rays travelled from the cathode to the anode. These rays were called cathode rays. Thomson observed that these rays were deflected towards the positive plate in an electric field. This showed that cathode rays were made of negatively charged particles.

Definition: Electron

An electron is a negatively charged subatomic particle present outside the nucleus of an atom. It is represented as e−.

Important Observations

  • Cathode rays travel in straight lines.
  • They cast shadows of objects placed in their path.
  • They are deflected towards the positive plate, proving they are negatively charged.
  • The same particles were obtained from different gases and electrodes, showing that electrons are present in all atoms.

Why did Thomson conclude that electrons are universal?

Because cathode rays had the same nature even when different gases and electrode materials were used. This means the negatively charged particles were not special to one element; they were part of all atoms.

Particle Symbol Relative Charge Approximate Relative Mass Location
Electron e− −1 1/1836 of proton Outside nucleus
Proton p+ +1 1 u Nucleus
Neutron n0 0 1 u Nucleus
Topic 4

J. J. Thomson’s Model of Atom

After discovering electrons, Thomson knew that atoms contain negative particles. But atoms are electrically neutral. Therefore, he proposed that the atom must also contain positive charge to balance the negative charge of electrons.

− − − − Positive sphere

Diagram: Thomson’s plum pudding model — electrons embedded in a sphere of positive charge.

Postulates of Thomson’s Model

  • An atom is a sphere of positive charge.
  • Electrons are embedded in this positively charged sphere.
  • The negative charge of electrons balances the positive charge of the sphere.
  • Therefore, the atom as a whole is electrically neutral.

Analogy

Thomson compared the atom to a watermelon: the red edible part represents positive charge and the seeds represent electrons. It is also called the plum pudding model.

Shortcomings of Thomson’s Model

  • It could not explain Rutherford’s gold foil experiment.
  • It could not explain why most alpha particles passed straight through gold foil.
  • It failed to explain why a few alpha particles were deflected through large angles.
  • It did not have the concept of a small, dense nucleus.

Common Mistake

Do not write that Thomson’s model contains a nucleus. Thomson’s model has no nucleus.

Topic 5

Rutherford’s Gold Foil Experiment

In 1911, Hans Geiger and Ernest Marsden, working under Ernest Rutherford, performed the famous gold foil experiment. They bombarded a very thin sheet of gold foil with positively charged alpha particles.

Canvas Diagram: Alpha particles passing, deflecting and bouncing near the dense positive nucleus.

Why gold foil was used

Gold is highly malleable, so it can be beaten into extremely thin sheets. A very thin foil was needed so alpha particles could pass through only a few layers of atoms.

Expected Result According to Thomson’s Model

If positive charge was spread uniformly throughout the atom, alpha particles should pass almost straight through the foil with only slight deflection.

Actual Observations

Observation What it means
Most alpha particles passed straight through the gold foil. Most of the atom is empty space.
Some alpha particles were deflected through small angles. Positive charge is concentrated in a small region.
Very few alpha particles bounced back. The atom has a very small, dense, positively charged centre.

Why did the gold foil experiment fail Thomson’s model?

Thomson’s model suggested that positive charge is spread throughout the atom. If that were true, alpha particles would not bounce back sharply. The sharp rebound of a few alpha particles proved that positive charge and most mass are concentrated in a tiny nucleus.

Board Exam Focus

The most important line: Most alpha particles passed undeflected, so most of the atom is empty space.

Topic 6

Rutherford’s Nuclear Model of Atom

Based on the gold foil experiment, Rutherford proposed the nuclear model of atom. This model introduced the idea that an atom has a tiny, dense, positively charged centre called the nucleus.

Postulates of Rutherford’s Model

  • An atom contains a small, dense and positively charged nucleus at the centre.
  • Most of the mass of the atom is concentrated in the nucleus.
  • Electrons revolve around the nucleus in circular paths.
  • Most of the atom is empty space.
  • The total positive charge of the nucleus is balanced by the total negative charge of electrons.
Nucleus

Diagram: Rutherford’s planetary model of atom.

Limitations of Rutherford’s Model

According to classical physics, a charged particle moving in a circular path should lose energy continuously. Since electrons are charged particles revolving around the nucleus, they should lose energy, spiral into the nucleus and the atom should collapse. But atoms are stable. Rutherford’s model could not explain this stability.

Common Mistake

Do not write that Rutherford explained stable orbits. Stability of electrons was explained by Bohr, not Rutherford.

Topic 7

How Proton Was Discovered

The discovery of electrons proved that atoms contain negatively charged particles. Since atoms are neutral, scientists searched for positively charged particles. Experiments with discharge tubes using perforated cathodes showed rays travelling in the opposite direction to cathode rays. These were called canal rays or anode rays.

Definition: Proton

A proton is a positively charged subatomic particle present in the nucleus of an atom. It is represented as p+.

Important Points

  • Canal rays are positively charged.
  • The lightest positively charged particle was later identified as the proton.
  • Rutherford played an important role in identifying the hydrogen nucleus as the proton.
  • The number of protons in an atom determines its atomic number and identity.

Remember This

If the number of protons changes, the element changes. If the number of neutrons changes, the isotope changes.

Topic 8

Bohr’s Model of Atom

Niels Bohr improved Rutherford’s model by explaining why electrons do not fall into the nucleus. He proposed that electrons move only in certain fixed circular paths called orbits, shells or energy levels.

Canvas Diagram: Bohr model with K, L and M shells.

Postulates of Bohr’s Model

  • Electrons revolve around the nucleus only in certain fixed orbits.
  • Each orbit has a fixed energy. Hence, these orbits are called energy levels.
  • Electrons do not lose energy while revolving in these fixed orbits.
  • Energy is absorbed or emitted only when an electron jumps from one energy level to another.
  • The shells are named K, L, M, N and so on, starting from the nucleus.
Shell Principal Quantum Number Maximum Electrons by 2n²
K n = 1 2 × 1² = 2
L n = 2 2 × 2² = 8
M n = 3 2 × 3² = 18
N n = 4 2 × 4² = 32

Shortcomings of Bohr’s Model

  • It works well mainly for hydrogen and hydrogen-like atoms.
  • It cannot fully explain spectra of atoms with many electrons.
  • It treats electrons as moving in fixed circular paths, but modern atomic theory describes electron clouds and probability regions.

Why is Bohr’s model still taught?

Because it gives a simple and useful way to understand shells, electronic configuration, valency and chemical behaviour at Class 9 level.

Topic 9

Bohr-Bury Rules of Electronic Distribution

Bohr and Bury gave rules to distribute electrons in different shells of an atom.

Rule 1: Maximum electrons in a shell

Maximum number of electrons in a shell = 2n²

Here, n is the shell number. For K shell, n = 1; for L shell, n = 2; for M shell, n = 3.

Rule 2: Outermost shell rule

The maximum number of electrons in the outermost shell cannot be more than 8, except the first shell which can hold a maximum of 2 electrons.

Rule 3: Stepwise filling

Electrons are filled from the inner shell to the outer shell. K shell is filled first, then L shell, then M shell and so on.

Example: Sodium, Atomic Number 11

Sodium has 11 electrons. K shell gets 2 electrons, L shell gets 8 electrons and the remaining 1 electron goes to M shell. Therefore, electronic configuration = 2, 8, 1.

Topic 10

Discovery of Neutron

Scientists observed that the mass of many atoms could not be explained only by protons. For example, helium has two protons, but its mass is about four times that of hydrogen. This suggested the presence of another particle in the nucleus that adds mass but has no charge.

Definition: Neutron

A neutron is a neutral subatomic particle present in the nucleus of an atom. It has nearly the same mass as a proton and is represented as n0.

In 1932, James Chadwick discovered the neutron. Neutrons are present in the nucleus of all atoms except the most common form of hydrogen, which has only one proton and no neutron.

Remember This

Mass of atom comes mainly from protons and neutrons. Electrons have extremely small mass, so their mass is usually ignored in Class 9 calculations.

Topic 11

Symbols of Elements

A chemical symbol is a short way to represent an element. It usually consists of one or two letters. The first letter is always capital and the second letter, if present, is always small.

Element Symbol Element Symbol
HydrogenHHeliumHe
LithiumLiBerylliumBe
BoronBCarbonC
NitrogenNOxygenO
FluorineFNeonNe
SodiumNaMagnesiumMg
AluminiumAlSiliconSi
PhosphorusPSulphurS
ChlorineClArgonAr
PotassiumKCalciumCa

Common Mistake

Write Co for cobalt, not CO. CO means carbon monoxide. Capitalisation changes meaning in chemistry.

Topic 12

Atomic Number and Mass Number

Atomic Number

The atomic number of an element is the number of protons present in the nucleus of one atom of that element. It is represented by Z.

Atomic number, Z = Number of protons = Number of electrons in a neutral atom

Mass Number

The mass number of an atom is the total number of protons and neutrons present in its nucleus. It is represented by A.

Mass number, A = Number of protons + Number of neutrons
Number of neutrons = A − Z

Symbolic Representation

A Z X

X = symbol of element, A = mass number, Z = atomic number.

Example

For 2311Na, atomic number = 11, mass number = 23, protons = 11, electrons = 11, neutrons = 23 − 11 = 12.

Topic 13

Electronic Configuration of Atoms

The arrangement of electrons in different shells of an atom is called electronic configuration.

Atomic Number Element Symbol Electronic Configuration Valence Electrons Valency
1HydrogenH111
2HeliumHe220
3LithiumLi2, 111
4BerylliumBe2, 222
5BoronB2, 333
6CarbonC2, 444
7NitrogenN2, 553
8OxygenO2, 662
9FluorineF2, 771
10NeonNe2, 880
11SodiumNa2, 8, 111
12MagnesiumMg2, 8, 222
13AluminiumAl2, 8, 333
14SiliconSi2, 8, 444
15PhosphorusP2, 8, 553
16SulphurS2, 8, 662
17ChlorineCl2, 8, 771
18ArgonAr2, 8, 880
19PotassiumK2, 8, 8, 111
20CalciumCa2, 8, 8, 222

Exam Tip

For Class 9, learn electronic configurations of the first 20 elements very well. Most valency and shell-based questions come from these.

Topic 14

Valency and How to Calculate It

Valency

Valency is the combining capacity of an atom. It tells how many electrons an atom can lose, gain or share to complete its outermost shell.

How to calculate valency

Valence Electrons Valency Reason
1, 2, 3Same as valence electronsAtom tends to lose these electrons.
44Atom may share 4 electrons.
5, 6, 78 − valence electronsAtom tends to gain electrons to complete octet.
80Outer shell is complete.

Examples

Sodium: 2,8,1 → valence electrons = 1 → valency = 1.

Oxygen: 2,6 → valence electrons = 6 → valency = 8 − 6 = 2.

Neon: 2,8 → complete octet → valency = 0.

Common Mistake

Valency is not always equal to valence electrons. For oxygen, valence electrons = 6 but valency = 2.

Topic 15

Isotopes, Isobars and Isotones

Isotopes

Isotopes are atoms of the same element having the same atomic number but different mass numbers. They have the same number of protons but different numbers of neutrons.

Isotopes of Hydrogen Symbol Protons Neutrons Mass Number
Protium1H101
Deuterium2H or D112
Tritium3H or T123

Properties of Isotopes

  • Isotopes have the same chemical properties because they have the same electronic configuration.
  • They have different physical properties because their mass numbers are different.
  • They occupy the same position in the periodic table because their atomic number is the same.

Uses of Isotopes

  • Cobalt-60 is used in cancer treatment.
  • Iodine-131 is used in thyroid treatment and diagnosis.
  • Carbon-14 is used in dating old fossils and archaeological samples.
  • Uranium-235 is used as nuclear fuel.

Isobars

Isobars are atoms of different elements having the same mass number but different atomic numbers.

Examples of Isobars

4018Ar, 4019K and 4020Ca are isobars because they have the same mass number 40 but different atomic numbers.

Isotones

Isotones are atoms of different elements having the same number of neutrons but different atomic numbers and different mass numbers.

Example of Isotones

146C and 157N are isotones because both have 8 neutrons.

Basis Isotopes Isobars Isotones
Elements Same element Different elements Different elements
Atomic number Same Different Different
Mass number Different Same Different
Neutrons Different May be different Same
Example 35Cl and 37Cl 40Ar and 40Ca 14C and 15N
Topic 16

Average Atomic Mass

Most elements exist as a mixture of isotopes. Therefore, the atomic mass of an element is the weighted average of the masses of its naturally occurring isotopes.

Average atomic mass = Σ isotopic mass × fractional abundance

Example: Chlorine

Chlorine has two isotopes: Cl-35 and Cl-37. Their approximate natural abundances are 75% and 25%.

Average atomic mass = 35 × 75/100 + 37 × 25/100

= 26.25 + 9.25 = 35.5 u

Why is chlorine’s atomic mass 35.5 and not a whole number?

Because natural chlorine is a mixture of isotopes. The value 35.5 u is the weighted average of chlorine isotopes, not the mass of one single chlorine atom.

Vocabulary

Important Terms

Atom: Smallest particle of an element taking part in chemical reactions.
Electron: Negatively charged particle outside nucleus.
Proton: Positively charged particle inside nucleus.
Neutron: Neutral particle inside nucleus.
Nucleus: Dense central part of atom containing protons and neutrons.
Shell: Fixed energy level around nucleus.
Valence shell: Outermost shell of an atom.
Valence electrons: Electrons present in outermost shell.
Valency: Combining capacity of an atom.
Atomic number: Number of protons in an atom.
Mass number: Total number of protons and neutrons.
Isotope: Same atomic number, different mass number.
Visual Learning

Concept Maps and Flowcharts

Evolution of Atomic Models

DaltonAtom as indivisible sphere
ThomsonPositive sphere with electrons
RutherfordDense nucleus and empty space
BohrFixed shells and energy levels
Modern ViewElectron cloud probability model

Atomic Calculation Flowchart

Given A and Z
→
Protons = Z
→
Electrons = Z for neutral atom
→
Neutrons = A − Z
→
Configuration → Valency
Formula Bank

Important Formulas, Rules and Units

Z = Number of protons
For neutral atom: electrons = protons
A = protons + neutrons
Neutrons = A − Z
Maximum electrons in shell = 2n²
Average atomic mass = Σ mass × fractional abundance
Quantity Symbol Unit / Value
Atomic mass unitu1/12th mass of carbon-12 atom
Atomic numberZNo unit
Mass numberANo unit
Relative charge of electrone−−1
Relative charge of protonp++1
Relative charge of neutronn00
NCERT Focus

NCERT Line-by-Line Important Explanation

“Most alpha particles passed through the gold foil without deflection.”

This proves that most of the atom is empty space.

“A few alpha particles were deflected through large angles.”

This proves that positive charge is concentrated in a very small region called nucleus.

“Electrons revolve in fixed energy levels.”

This is the central idea of Bohr’s model. It explains atomic stability at Class 9 level.

“Atoms of the same element can have different numbers of neutrons.”

This line leads to the concept of isotopes.

NCERT-Based Questions

  1. Why did Rutherford select gold foil for his experiment?
  2. What are the three observations of Rutherford’s experiment?
  3. Why could Rutherford’s model not explain stability of atom?
  4. What are isotopes? Give two examples.
  5. Calculate protons, electrons and neutrons in 2412Mg.
Board Exam Focus

Most Important CBSE Points

  • Thomson discovered the electron and proposed the plum pudding model.
  • Thomson’s model failed because it could not explain alpha particle scattering.
  • Rutherford concluded that most of the atom is empty space and the nucleus is small, dense and positively charged.
  • Rutherford’s model failed to explain the stability of atoms.
  • Bohr proposed fixed energy levels to explain atomic stability.
  • Maximum electrons in a shell are given by 2n².
  • Valency depends on the number of electrons in the outermost shell.
  • Isotopes have same atomic number but different mass number.
  • Isobars have same mass number but different atomic numbers.
  • Average atomic mass is calculated using relative abundance of isotopes.
Foundation Edge

Olympiad and HOTS Conceptual Points

Why do isotopes have same chemical properties?

Chemical properties depend mainly on electronic configuration. Isotopes have the same atomic number, so neutral isotopes have the same number of electrons and same electronic configuration.

Why do isobars have different chemical properties?

Isobars belong to different elements and have different atomic numbers, so their electronic configurations are different.

Why are electrons ignored in mass number?

Electron mass is extremely small compared to proton and neutron. Therefore, mass number counts only protons and neutrons.

Why can neutrons enter nuclei easily?

Neutrons have no charge, so they are not strongly repelled by positively charged nuclei. This makes them useful in nuclear reactions.

Avoid These

Common Misconceptions and Mistakes

Wrong Idea Correct Concept
Atoms are indivisible. Atoms contain electrons, protons and neutrons.
Thomson’s model has a nucleus. Thomson’s model has no nucleus.
Atomic number means number of electrons only. Atomic number means number of protons. In a neutral atom, electrons are equal to protons.
Valency is always equal to valence electrons. For 5, 6, 7 valence electrons, valency = 8 − valence electrons.
Isotopes have different chemical properties. Isotopes have similar chemical properties but different physical properties.
Mass number has unit gram. Mass number is a count of nucleons, so it has no unit.
Quick Revision

Mind Map

Journey Inside the Atom
Subatomic particles
e−, p+, n0
Atomic models
Thomson → Rutherford → Bohr
Shells
K, L, M, N
Configuration
2, 8, 8 rule for first 20
Valency
Combining capacity
Isotopes and isobars
Same Z / same A
Practice Zone

Important Questions

A. MCQs

  1. The particle discovered by J. J. Thomson is:
    A. Proton B. Electron C. Neutron D. Nucleus
  2. Most alpha particles passed straight through gold foil because:
    A. atoms are solid B. atoms are neutral C. most of atom is empty space D. electrons are heavy
  3. The maximum number of electrons in L shell is:
    A. 2 B. 8 C. 18 D. 32
  4. Atomic number is equal to:
    A. protons B. neutrons C. protons + neutrons D. electrons + neutrons
  5. Which pair represents isotopes?
    A. 35Cl and 37Cl B. 40Ar and 40Ca C. Na and Mg D. C and N
  6. The valency of oxygen is:
    A. 1 B. 2 C. 6 D. 8
  7. Rutherford’s model failed to explain:
    A. nucleus B. empty space C. stability of atom D. positive charge
  8. Neutron was discovered by:
    A. Bohr B. Thomson C. Chadwick D. Dalton

B. Fill in the Blanks

  1. The centre of an atom is called the __________.
  2. The maximum electrons in a shell are given by the formula __________.
  3. Atoms of the same element with different mass numbers are called __________.
  4. The number of protons in an atom is called __________.
  5. The electronic configuration of sodium is __________.

C. True or False

  1. Thomson’s model successfully explained the gold foil experiment.
  2. Mass number is the sum of protons and neutrons.
  3. Isotopes have different atomic numbers.
  4. Electrons are present outside the nucleus.
  5. Neon has valency zero.

D. Assertion-Reason Questions

  1. Assertion: Most alpha particles passed through gold foil without deflection.
    Reason: Most of the atom is empty space.
  2. Assertion: Isotopes have similar chemical properties.
    Reason: Isotopes have the same electronic configuration.
  3. Assertion: Rutherford’s model could not explain atomic stability.
    Reason: Accelerating charged electrons should lose energy continuously.
  4. Assertion: Isobars are atoms of the same element.
    Reason: Isobars have the same mass number.

E. Very Short Answer Questions

  1. Name the three subatomic particles.
  2. What is the charge on an electron?
  3. Define atomic number.
  4. Write the electronic configuration of magnesium.
  5. What is valency?
  6. What is the mass number of an atom having 11 protons and 12 neutrons?

F. Short Answer Questions

  1. Write three postulates of Thomson’s model of atom.
  2. Give three observations of Rutherford’s gold foil experiment.
  3. Why did Rutherford conclude that most of the atom is empty space?
  4. State Bohr-Bury rules for electronic distribution.
  5. Differentiate between isotopes and isobars.
  6. Why do isotopes have similar chemical properties?

G. Long Answer Questions

  1. Describe Rutherford’s gold foil experiment. Write its observations and conclusions.
  2. Explain Thomson’s model, Rutherford’s model and Bohr’s model with limitations.
  3. Explain electronic configuration and valency with examples of sodium, magnesium, oxygen and chlorine.
  4. What are isotopes, isobars and isotones? Explain with examples and differences.

H. Numericals

  1. An atom has atomic number 17 and mass number 35. Find protons, electrons and neutrons.
  2. Calculate the number of neutrons in 2713Al.
  3. The average atomic mass of an element X is calculated from isotopes X-10 and X-11 present in 20% and 80% abundance. Find average atomic mass.
  4. An element has electronic configuration 2,8,6. Find atomic number and valency.
  5. An atom has 20 protons and 20 neutrons. Write its atomic number and mass number.

I. Case Study Based Questions

Case Study 1: A scientist bombarded a thin gold foil with alpha particles. Most particles passed straight through, some were deflected and a few bounced back.

  1. Name the experiment.
  2. What did most particles passing straight prove?
  3. What did bouncing back of a few particles prove?
  4. Which atomic model failed due to this experiment?

Case Study 2: An element has atomic number 12 and mass number 24. It forms an ion by losing two electrons.

  1. Find the number of protons.
  2. Find the number of neutrons.
  3. Write electronic configuration of the neutral atom.
  4. What is its valency?
Answer Key

Answers

A. MCQs

1. B, 2. C, 3. B, 4. A, 5. A, 6. B, 7. C, 8. C

B. Fill in the Blanks

1. nucleus, 2. 2n², 3. isotopes, 4. atomic number, 5. 2,8,1

C. True or False

1. False, 2. True, 3. False, 4. True, 5. True

D. Assertion-Reason

1. Both true and Reason explains Assertion. 2. Both true and Reason explains Assertion. 3. Both true and Reason explains Assertion. 4. Assertion false, Reason true.

E. Very Short Answers

  1. Electron, proton and neutron.
  2. Negative charge.
  3. Atomic number is the number of protons in an atom.
  4. Magnesium: 2,8,2.
  5. Valency is the combining capacity of an atom.
  6. Mass number = 11 + 12 = 23.

H. Numericals

  1. Protons = 17, electrons = 17, neutrons = 35 − 17 = 18.
  2. Neutrons = 27 − 13 = 14.
  3. Average mass = 10 × 20/100 + 11 × 80/100 = 2 + 8.8 = 10.8 u.
  4. Atomic number = 16, valency = 2.
  5. Atomic number = 20, mass number = 40.

Case Study Answers

Case 1: Gold foil experiment; most atom is empty space; nucleus is small, dense and positively charged; Thomson’s model failed.

Case 2: Protons = 12; neutrons = 12; configuration = 2,8,2; valency = 2.

Final Sheet

One-Page Final Revision Sheet

Must Remember

  • Electron: negative, outside nucleus.
  • Proton: positive, inside nucleus.
  • Neutron: neutral, inside nucleus.
  • Atomic number = protons.
  • Mass number = protons + neutrons.
  • Neutrons = A − Z.

Model Sequence

  • Dalton: indivisible atom.
  • Thomson: plum pudding model.
  • Rutherford: nuclear model.
  • Bohr: fixed energy levels.
  • Modern: electron cloud model.

Shell Capacity

  • K = 2
  • L = 8
  • M = 18, but first 20 elements generally fill as 2,8,8…
  • Outermost shell maximum = 8.

Isotope Family

  • Isotopes: same Z, different A.
  • Isobars: same A, different Z.
  • Isotones: same neutrons.
  • Average atomic mass uses abundance.

Prepared by SK Tuitions | CBSE Science Notes | Conceptual, Exam-Focused and Foundation-Oriented Learning

Back to Top ↑

Leave a Reply

SK Tuitions provides high-quality CBSE study material for Classes 6 to 10, including chapter-wise notes, worksheets, important questions, practice tests and concept-based explanations for Maths and Science. The aim is to make learning simple, structured and exam-focused for every student.

Let’s connect

tag here. */